Data storage: HDD and SSD defined

When purchasing new computers, buyers used to have limited choices when it came to what kind of storage they got with their laptop or desktop PCs. But nowadays you can configure your system with either traditional hard disk drives (HDDs), increasingly common solid state drives (SSDs), or in some cases both. Here’s a comparison of both storage drives so you can figure out which best suits your needs.

What is an HDD?

An HDD is basically a storage device in a computer. It consists of metal platters with magnetic coating, a spindle, and various moving parts to process and store data. The common size for laptop hard drives is the 2.5” model, while a larger 3.5” model is usually found in desktop computers.

What is an SSD?

An SSD is another type of data storage that performs the same job as an HDD. But instead of storing data in a magnetic coating on top of platters, an SSD uses flash memory chips and an embedded processor to store, retrieve, and cache data. It is roughly about the same size as a typical HDD, and resembles smartphone batteries.

HDD and SSD comparison

The differences in capabilities between the two storage devices can be grouped into six categories:

1. Speed

This is where SSDs truly prevail. While HDDs need a long time to access data and files because the disk must spin to find it, SSDs can complete this task 200% faster since data is instantly accessed through flash memory chips. This is why an SSD-equipped PC will boot operating systems within seconds and deliver blazing-fast speed for launching programs and applications, whereas a computer that uses an HDD will take a much longer time to boot the operating system, and will continue to perform slower than an SSD during normal use.

2. Capacity

The largest SSD units have a maximum 100 TB storage capacity. Although there are large SSDs, anything that’s over 1 TB will cost businesses a lot of money. HDDs, on the other hand, have much larger capacities available for much more affordable prices.

3. Durability

HDDs consist of various moving parts and components, making them susceptible to shock and damage. The longer you use your HDD, the more it wears down and most eventually end up failing. Meanwhile, an SSD uses a nonmechanical design of flash storage mounted on a circuit board, providing better performance and reliability, and making it more likely to keep your files and data safe.

4. Noise

An HDD can sometimes be the loudest part of your computer. Even the highest-performing HDDs will emit some noise when the drive is spinning back and forth to process data. SSDs have no moving parts, meaning it makes no noise at all.

5. Heat

More moving parts means more heat, and HDD users will have to live with the fact that their device will degenerate over time. SSD uses flash memory, generating less heat, helping to increase its lifespan.

6. Cost

SSDs are generally much more expensive than HDDs for the same capacity. This is why many budget laptops may only have up to 512 GB of SSD storage.

Despite the high costs and low capacity, however, SSDs are the clear winner over HDDs in terms of performance. While you’re paying more for less memory with an SSD, you’re investing in a faster and far more durable data storage option in the long run.

We recommend using an SSD as the primary storage for your operating system, applications, and most-used programs. Many laptops and computers also allow you to install additional SSDs, so you can upgrade as required if your storage needs grow. Implementing HDD as a secondary storage unit is another great idea, especially if you need a place to store documents and pictures because they don’t need to leverage the incredible access times and speeds of an SSD.

Looking to invest in some new hardware for your business? Talk with our experts before you make a decision. We can provide sound advice and help guide you in the right direction.

Published with permission from Source.